HUK型
Technology parameters:
Pressure:0~25Mpa
Temperature:-40℃~250℃
Revolution speed:22m/s
Single end surface, balanced type, a large spring, axially regulated outside the pump, the product is applied to high-viscosity granular mediums such as paper making, oil refining,sugaring and asphalt and other industries.
d0 | d1 | d2 | d3 | d4 | d6 | d7 | L1 | L2 | L3 | |
1750 | 33 | 39.6 | 44.5 | 62 | 80 | 52.5 | 62 | 69 | 89 | 25 |
2125 | 44 | 47.6 | 54 | 76 | 90 | 64 | 76.1 | 92 | 109.5 | 35 |
2250 | 45 | 52.3 | 57 | 75 | 90 | 64 | 73 | 71 | 89 | 27 |
2500 | 54 | 57.1 | 63.5 | 85.8 | 90 | 70.5 | 82.6 | 95 | 119 | 45 |
2875 | 56 | 66.6 | 73 | 95 | 105 | 80 | 92 | 93 | 115 | 32 |
3250 | 66 | 76.2 | 82.6 | 104.6 | 115 | 91.4 | 101.4 | 93 | 116 | 32 |
3375 | 75 | 7.3 | 85.7 | 112.4 | 120 | 100.3 | 112.7 | 101.7 | 123.5 | 37 |
3625 | 80 | 85.7 | 92 | 114.2 | 130 | 102 | 114 | 97.5 | 117 | 36.5 |
4000 | 95.2 | 102 | 125.4 | 107.7 | 121 | 102 | 123.1 | 36.5 | ||
4500 | 107.9 | 114.3 | 142 | 124 | 136.6 | 103.7 | 124.7 | 36.5 | ||
4875 | 115.8 | 123.8 | 150 | 132.5 | 145.5 | 100.7 | 130.2 | 36.5 |
224型
Technology parameters:
Sealing medium:weak acid or weak alkali liquid
Temperature of seal cavity:-20~+150℃
Pressure of seal cavity:0~0.8Mpa
Maximum revolution speed:3000r/min
d1 | d3 | d4 | d6 | d7 | L1 | L2 | L3 |
35 | 57.5 | 61 | 45 | 55 | 17 | 62 | 100 |
40 | 62.5 | 66 | 50 | 60 | 20 | 65 | 103 |
45 | 67.5 | 71 | 55 | 65 | 25 | 70 | 108 |
50 | 72.5 | 76 | 60 | 70 | 28 | 73 | 111 |
55 | 77.5 | 81 | 65 | 75 | 30 | 75 | 113 |
60 | 82.5 | 86 | 70 | 80 | 30 | 75 | 113 |
65 | 92.5 | 96 | 80 | 90 | 35 | 86 | 130 |
70 | 97.5 | 101 | 85 | 97 | 37 | 88 | 138 |
152型
Technology parameters:
Sealing medium:some general corrosive chemical mediums such as water, oil and weak acid and dlkali and etc.
Temperature of seal cavity:120℃
Pressure of seal cavity:≤3Mpa
Maximum revolution speed:≤15m/Sec
d | D | D1 |
30 | 70 | 53 |
35 | 75 | 58 |
40 | 80 | 63 |
45 | 86 | 68 |
50 | 91 | 73 |
55 | 96 | 78 |
60 | 101 | 83 |
65 | 106 | 88 |
70 | 111 | 93 |
WB2型
Technology parameters:
Sealing medium:some general corrosive chemical mediums such as water, oil and weak acid and alkali and etc.
Temperature of seal cavity:120℃
Pressure of seal cavity:≤3Mpa
Maximum revolution speed:≤15m/Sec
d | D | D1 | D2 |
30 | 74 | 53 | 67 |
35 | 79 | 57 | 70 |
40 | 84 | 62 | 76 |
45 | 89 | 67 | 82 |
50 | 96 | 72 | 86 |
60 | 101 | 82 | 95 |